Dolmar SP-7650.4 R Manual De Instrucciones Original página 20

Installing and removing the dispersion cover
o install the dispersion co er 1 , mount the dispersion co er on the top no le 2
so that its protrusion 3 is aligned with the notch 4 in the top no le.
Secure the dispersion co er by turning it ully clockwise.
o remo e the dispersion co er, ollow the abo e procedure in re erse.
Installing and removing the deflector (optional accessory)
he de ector 1 allows chemicals to be sprayed upward. his helps treatment or
low-growing plants and the underside o lea es o plants.
o install the de ector 1 , mount the de ector on the top no le so that the
3 on it is aligned with the
Secure the de ector by turning it ully clockwise.
o remo e the de ector, ollow the abo e procedure in re erse.
Changing the nozzle to a small-amount-solution-discharge
nozzle (optional accessory)
hen a small amount o solution needs to be sprayed, replace the no le cap with
another type o supplied no le cap with a small discharge hole.
o replace the no le, ollow the procedure below.
1. emo e the screw 1 rom the second no le 2 and then remo e the top no le
3 and dispersion co er 4 .
mark 4 o the top no le 2 .
mark
20
( )
( )
1
4
2
1
( )
(1)
(1)
( )
3
( )
( )