Luminance Brands Kathy Ireland Home PRO Serie Manual Del Propietário página 8

4. Installing the Ceiling Cover on the Fan Motor
Housing
4.1
Remove Three Motor Housing Screws (every other
screw as illustrated) from the Top of the Motor Housing
(Figure 6) .
Retain the Three Motor Housing Screws for future use .
4.2
Position the Rubber Gasket (supplied in parts bag) on
the Motor Housing .
The Three Small Holes in the Gasket should Center
over the Holes in the Motor Housing where the Three
Screws were previously removed (Figure 7) .
The Three Large Holes in the Gasket should Center
over the Three Screws still Installed in the Motor
Housing .
All manuals and user guides at all-guides.com
(For Close-to-the-Ceiling Mounting)
8
Figure 6
RUBBER GASKET
SMALL HOLES (3)
RUBBER GASKET
LARGE HOLES (3)
Figure 7
REMOVE SCREWS (3)
MOTOR
HOUSING
SCREWS (3)
MOTOR
HOUSING
INSTALL
RUBBER
GASKET
RUBBER
GASKET
MOTOR
HOUSING
U.L. Model No.: 42-ANT & 52-ANT