Luminance Brands Kathy Ireland Home PRO Serie Manual Del Propietário página 9

4. Installing the Ceiling Cover on the Fan Motor
Housing
4.3
Gently pry the Decorative Cap from the Ceiling Cover
(Figure 8) .
4.4
Align the Holes in the Ceiling Cover with the Holes in
the Motor Housing and Secure using the Three Screws
previously removed in Step 4 .1 (Figure 9) .
NOTE: For hanging instructions using Close-to-the-
Ceiling Method, See Page 12, Section 7. Hanging
the Ceiling Fan (Close-to-the-Ceiling Method with
Ceiling Cover Installed on the Motor Housing).
4.5
The Fan comes with Blue, Black and White Wires that
are 42" or 80" Long, depending on the Model .
Measure up Approximately 6 to 9-inches above the
Motor Coupler (Figure 10) .
Cut off Excess Wires and Strip back Insulation 1/2-inch
from ends of Wires .
All manuals and user guides at all-guides.com
(For Close-to-the-Ceiling Mounting) (Continued)
DECORATIVE CAP
CEILING COVER
Figure 8
SCREWS (3)
(Previously Removed)
CEILING COVER
RUBBER GASKET
Figure 9
MOTOR
MOTOR
COUPLING
COUPLER
Figure 10
Please contact 1-800-777-4440 for further assistance
9
6 TO 9
INCHES
luminancebrands.com
U.L. Model No.: 42-ANT & 52-ANT