EN
Problem
The bean container (1)
cannot be placed on.
Espresso or milk has
an unpleasant taste.
A large amount of
steam is produced in
the brewing process.
During use, an
unpleasant smell
is detected.
Possible cause
Coffee beans are blocking the
opening of the grinder (3).
The bean container is in the
wrong position.
The catch at the bottom of the
bean container is not in the
correct position.
The grinding collar is not inserted
in the grinder (3) correctly.
The espresso beans are too old.
The water in the water tank (6)
is no longer fresh.
The device is furred up.
The device is being used for the
昀椀rst time.
The device has previously been
descaled.
Fix
Remove from the grinder all
coffee beans that are sticking
up above the grinding collar.
When you insert the bean
container, hold it so that the
grinding 昀椀neness scale at the back
and the scale arrow with the lock
symbol on the bean container
and the scale mark on the device
are aligned (Picture F).
Twist the catch on the bean
container so that it is fully closed
(Picture G).
When the grinding collar is
locked in place, you must be able
to feel obvious resistance. Then
昀氀ip down the metal clip.
Empty the bean container (1),
clean the grinder (3) and add
new espresso beans.
Clean the water tank and add
fresh water. Do not leave water
residues standing for a long time.
Descale the device.
A smell often develops when
new devices are 昀椀rst used. The
smell should disappear once the
device has been used several
times.
Rinse out the device with fresh
water.
62