CLEANING AND MAINTENANCE
Removing the doors
The oven door should be fully
a.
open.
b. The latch hinges completely lifted.
c. Gently close the oven door until you
hear the sound of engagement, once they
reach a clamping position, with both hands
holding the door and continue to push, pull
up at the same time so that the hinge bolt
removed from the oven.
d. After cleaning, the hinge needs to be
aligned with the oven door latch; push
gently until they clip into place.
e.Push the latch down to its original
position with the oven door fully open.
Remove the inner glass panel
Glass door has two plastic fixing blocks.
a.
Use a slotted screwdriver to insert into the hole
of the plastic fixing block and gently pry it.
A
b. Remove the fixing blocks and the top end of the
plastic ventilation grid.
B
c. Pull out the inner glass from beneath the
plastic fixing blocks. After cleaning, insert the
inner glass, followed by the plastic fixing
blocks and the grid and refit the screws. The
door can now be re-installed.
C
76