Publicidad
Idiomas disponibles
Idiomas disponibles
On the panel there are: a graphic display, 4 navigation keys and 3 LED warning lights
(see Figure 10).
9.1.
Graphic Display
Using the graphic display it will be possible to navigate in an easy and intuitive menu
which will enable you to check and modify the system operating mode, the enabling of
the inputs and the working set-point. It will also be possible to view the system status
and the log of any alarms memorised by the system.
9.2.
Navigation Buttons
4 buttons are provided for navigating in the menu: 3 buttons under the display and 1 at
the side. The buttons under the display are called active buttons and the one at the side
is called hidden button. Each page of the menu is made in such a way as to indicate
the function associated with the 3 active buttons (the ones under the display).
9.3.
Warning Lights
Yellow light: System live signal.
If lit, it means that the system is live.
Never remove the cover if the yellow light is lit.
Red light: Warning of an alarm/malfunction present in the system.
If the light is blinking it is a non-blocking alarm and the pump can still be controlled. If
the light is fixed it is a blocking alarm and the pump cannot be controlled.
Green light: Pump ON/OFF signal.
if lit, the pump is running. If off, the pump is stopped..
10.
MENUS
EVOPLUS circulators offer 2 menus: user menu and advanced menu.
The user menu is accessible from the Home Page by pressing and releasing the central
"Menu" button.
The user menu is accessible from the Home Page by holding down the central "Menu"
button for 5 seconds.
Below are shown the user menu pages with which it is possible to check the system
status and modify its settings.
ENGLISH
Instead on the advanced menu there are the configuration
parameters for communication with MODBUS systems (for
further details click
here
or scan the QR code below).
To leave the advanced menu you must scroll through all the
parameters using the central button.
If the menu pages show a key at bottom left it means that it
is not possible to change the settings. To unblock the menus
go to the Home Page and press the hidden button and the button under the key at the
same time until the key disappears.
If no button is pressed for 60 minutes, the settings are automatically blocked and
the display switches off. When any button is pressed the display lights up again
and the "Home Page" appears.
To navigate in the menus, press the central button.
To return to the previous page, hold down the hidden button, then press and release
the central button.
To modify the settings use the left and right buttons.
To confirm the change of a setting, hold down the central button "OK" for 3 seconds.
Confirmation will be indicated by the following icon::
Home Page
20
The main settings of the system are graphically
summed up on the Home Page.
The icon at top left indicates the type of regulation
selected.
The icon at centre top indicates the operating
mode selected (auto or economy).
The icon at top right indicates the presence of a
single or twin inverter. The rotation of the icon
or
indicates which circulation pump
is operating.
At the centre of the Home Page is a read-only
parameter which can be chosen from a small set
of parameters on Page 9.0 of the menu.
From the Home Page it is possible to access the
page for regulating the contrast of the display: hold
Publicidad
