Publicidad
Idiomas disponibles
Idiomas disponibles
DRY mode
Ideal to reduce room humidity (spring and autumn, damp rooms rainy periods, etc).
Before using the dry mode, the appliance should be prepared in the same way as for cool mode, with
the air exhaust hose attached to enable the moisture to be discharged outside.
To set this mode correctly:
•
Press the "
the " Dry "symbol light appears, the screen will appear "
In this mode, fan speed is selected automatically by the appliance.
SETTING THE TIMER
This timer can be used to delay the appliance start up or shutdown, this avoids wasting electricity by
optimizing operating periods.
Programming start-up
- Turn on the appliance, choose the mode you want, for example Dehumidify mode, high fan speed.
Turn off the appliance.
- Press the "
from 0.5-24 hours.
- In 5 seconds without the operation, the timer start function, then the "Timer" symbol lights.
- Press the "
Programming shut down
- When the appliance is running, press the "
/ " ▽ "to adjust the set time from 0.5-24 hours.
- In 5 seconds without the operation, the timer start function, then the " Timer" symbol lights.
- Press the "
Switch the unit of temperature
When the appliance is running, hold on " △ " / " ▽ "button together 3 seconds by the same time, then
you can change the unit of temperature.
For example:
Before change, in cool mode, the screen display like fig1.
136
" button a number of times until
" button , the screen starts to flash, press the " △ " / " ▽ "to adjust the set time
" button again to cancel the Timer, and the "Timer" symbol disappear.
" button again to cancel the Timer, and the " Timer " symbol disappear.
";
" button, the screen starts to flash. - Press the " △ "
Publicidad
