Bathroom – Sanitize and deodorize bathtubs,
countertops, faucets, floors, glazed ceramic tile, glazed
porcelain, showers, nonporous shower curtains, shower
walls, sinks, vinyl and walls:
1.
Use one tablespoon per gallon of water.
2. Wash, rinse or wipe surfaces, then apply sanitizing
solution.
3. Let stand five minutes, then air dry.
SANITIZING HARD NON-POROUS SURFACES
1.
Use one tablespoon of bleach per gallon of water.
2. Wash, rinse or wipe surfaces and then apply
sanitizing solution.
3. Let stand five minutes, then air dry.
SANITIZING YOUR PETS' LITTER BOXES
1.
Wash thoroughly with water and dish detergent.
2. Sanitize with 2/3 cup of bleach mixed with a gallon
of water.
3. Let stand five minutes, then rinse with water and
allow to dry.
SANITIZING CHILDREN'S HARD NONPOROUS
FURNITURE AND TOYS
1.
Ensure all surfaces are colorfast. Wash all surfaces
thoroughly.
2. To kill 99.9% of germs, use a solution of one
tablespoon of bleach per gallon of water to sanitize
children's surfaces.
3. Let stand for five minutes, then rinse and allow to dry.
TOILET BOWLS
To sanitize and deodorize pre-cleaned toilet bowls, use
one cup of this product.
1.
Flush, pour in bleach and swab with brush, making
sure to get under the rim.
2. Let stand for 10 minutes.
3. Flush.
WARNING! Do not use with bowl cleaners or any
other household chemicals.
SANITIZATION OF POROUS NON-FOOD CONTACT
SURFACES
Rinse Method – Prepare a sanitizing solution by
thoroughly mixing 13 fl. oz. of this product with 10
gallons of water to provide approximately 600 ppm
PAGE 4 OF 30
SANITIZING – NON-FOOD CONTACT
available chlorine by weight. Clean surfaces in the
normal manner. Prior to use, rinse all surfaces thoroughly
with the sanitizing solution, maintaining contact with the
sanitizer for at least two minutes. Do not rinse equipment
with water after treatment and do not soak equipment
overnight.
Immersion Method – Prepare a sanitizing solution
by thoroughly mixing, in an immersion tank, 13 fl.oz.
of this product with 10 gallons of water to provide
approximately 600 ppm available chlorine by weight.
Clean equipment in the normal manner. Prior to use,
immerse equipment in the sanitizing solution for at least
two minutes and allow the sanitizer to drain. Do not rinse
equipment with water after treatment.
Spray/Fog Method – After cleaning, sanitize non-food
contact surfaces with 600 ppm available chlorine by
thoroughly mixing 13 fl. oz. of this product with
10 gallons of water. Use spray or fogging equipment
which can resist hypochlorite solutions. Always empty
and rinse spray/fog equipment with potable water after
use. Prior to using equipment, thoroughly spray or fog
all surfaces until wet, allowing excess sanitizer to drain.
Vacate area for at least two hours.
SANITIZING NONPOROUS NON-FOOD CONTACT
SURFACES
Rinse Method – Prepare a sanitizing solution by
thoroughly mixing 4.5 fl. oz. of this product with
10 gallons of water to provide approximately 200 ppm
available chlorine by weight. Clean equipment surfaces
in the normal manner. Prior to use, rinse all surfaces
thoroughly with the sanitizing solution, maintaining
contact with the sanitizer for at least two minutes. Do not
rinse equipment with water after treatment and do not
soak equipment overnight.
Immersion Method – Prepare a sanitizing solution by
thoroughly mixing, in an immersion tank,
4.5 fl. oz. of this product with 10 gallons of water to
provide approximately 200 ppm available chlorine by
weight. Clean equipment in the normal manner. Prior to
use, immerse equipment in the sanitizing solution for at
least two minutes and allow the sanitizer to drain. Do not
rinse equipment with water after treatment.
Spray/Fog Method – Prepare a 200 ppm available
chlorine sanitizing solution of sufficient size by
thoroughly mixing 4.5 fl. oz. product with 10 gallons
of water. Use spray or fogging equipment which can
resist hypochlorite solutions. Prior to using equipment,
thoroughly spray or fog all surfaces until wet, allowing
excess sanitizer to drain. Vacate area for at least two
hours.
0323 RS-19457