Publicidad
Idiomas disponibles
Idiomas disponibles
6.7
CUTTING UNIT LIFT / LOWER __________________________________________
To lift or lower the Cutting Units, the machine must first be set to Mow Mode by moving the Mow Speed Lever
into Mow position. (Section.6.11).
F305
The Cutting Unit Lift / Lower control lever will raise and lower all cutting units
simultaneously. The units will only lift to a partial Cross Cut position (Sec-
tion.6.5.7) unless the foot operated lever (A) is pressed and held. This will
then enable the units to lift to full transport position.
• To lower the Cutting Units move the Lift/Lower control lever fully forward
and release.
• To raise the Cutting Units move the Lift /Lower control lever rearwards
and release. If full lift to transport position is required simultaneously press
the foot lever (A) whilst operating the lift control lever.
F407 - There are Two Lift Mode functions available.
1. Independent Mode: The five centre units will lift and lower simultane-
ously by operating the Centre Control Lever. The outer Wing Units will lift
and lower independently. Operating the left hand lever will operate the left
hand Wing Unit. The right hand lever will operate right hand Wing Unit.
2. Linked Mode: When the Mode Switch (S) is pressed. All seven units
will lift and lower simultaneously by operating the Centre Control Lever.
The two outer control levers will become disabled and the Wing Units will
no longer operate independently of the five centre units.
• To lower the Cutting Units move the required Lift/Lower control levers
fully forward and release.
• To raise to Cross Cut position, with Cross Cut Enabled, move the
required Lift /Lower control levers rearwards and release.
• To raise to full to transport position. Simultaneously press the foot lever (A) whilst operating the lift control
levers. Move the required Lift /Lower control levers rearwards and hold until required units are fully raised.
With Wing Lock activated, the Wing Units cannot be lowered in either mode setting.
CONTROLS 6
A
F305
F407
S
en-47
Publicidad
