Publicidad
Idiomas disponibles
Idiomas disponibles
8.1
MAINTENANCE & LUBRICATION CHART__________________________________
GENERAL MAINTENANCE AND LUBRICATION CHART
Interval
First 50 hours
Daily
10 hours
Weekly
Every 50
hours
End of season
Every 1000
hours
Lubricate these fittings minimum weekly or more as conditions and use requires.
A = Arm Pivot B = Unit Mount Pivots C = Roller Bearing D = Motor & Bearing Housing
E = Steering Joints F = Axle Pivot
Description
Engine Oil reservoir
Engine Oil - System Total
Hydraulic Oil reservoir
Hydraulic Oil System Total
Radiator Coolant reservoir
Radiator Coolant System Total
Fuel
Grease
ENGINE OIL: MUST BE TO A.P.I. CLASSIFICATION CJ-4 GRADE.
Temperature
Above 25°C (77°F)
0°C to 25°C (32°F to 77°F)
Below 0°C (32°F)
Item
Visual inspection for damage or wear
Check reel & bottom blade condition
Change Hydraulic Charge Filter Element or earlier if screen
indicates.
Check pivot points, Lift arms, Rear Axle. Grease if
required.
Check Safety Interlock System.
Check Hydraulic Fluid Level
Check Tyre Pressure
Check Engine Bay & Cooling System for Debris
Check for Loose Components.
Check for Hydraulic Leaks.
Lubricate Cutting Unit grease points.
Check Battery Condition.
Change Hydraulic Oil & Filter
Check Hydraulic hoses for damage and wear
FLUID REQUIREMENTS
Quantity
- liters
-- liters
-- liters
45.4litres
As required
Viscosity
SAE30 or SAE10W-30 or 15W-40
SAE10W-30 or 15W-40
SAE10W-30
MAINTENANCE AND LUBRICATION 8
Type
10W 30 (See specification below)
ISO VG 46
50% Anti-Freeze
EN590 (ASTM D975) Ultra Low Sulfur Diesel
/ (No.2 DULS)
Shell Gadus 2 or equivalent
Section
-
9.4
8.8
8.1
7.2
8.5
4.4
8.2
-
-
8.24
8.13
8.8
8.17
en-61
Publicidad
