Resvent iBreeze CPAP System Manual Del Usuario página 17

# Feature
1 Mode
2 Enabled features
3 Time
4 Patient Sleep Quality
Report
5 Humidity
6 Mask fit
7 Comfort
8 Setting
9 Alarm Message
9.2.2 Patient Therapy Interface
When the therapy starts, the screen will switch to the Patient Therapy Interface, which
displays the therapy parameters monitoring during therapy (See Figure2). The
displayed parameters depend on the current therapy mode.
iBreeze CPAP System User Manual
Description
Display the current mode.
Depending on setup, certain enabled therapy features
will display here.
Display the current time.
Displays the patient sleep quality report and the options
for period of the report are: daily (recent 6 days) / 7 days
/ 14 days / 1 month / 3 months / 6 months / 1 year.
Set humidifier level to enhance patient comfort of
respiration.
Option: Auto / OFF / 1-8
Note:
1.The humidity level only can be set when the water in
humidifier exceeds the minimum water level for safe
operation.
2. The option Auto is not available in the iBreeze 20C.
Mask fit feature allows you to check the fit of your mask
prior to starting therapy. This is done by measuring the
amount of leak.
Press to enter Comfort setting interface.
Press to enter Patient System Setting interface.
Display the alarm messages.
14
Default: 3