Publicidad
Idiomas disponibles
Idiomas disponibles
Figure 4: Charger Setup Menu
3 To sequence through the Charger Setup menu selections, press the right arrow.
4 To sequence through the Charger Setup menu selections in reverse order, press the left arrow.
5 To enter the Charger Setup menu for the selection currently displayed, press OK.
6 To exit from the Charger Setup menu, press Back→ OK.
If no Keypad button is pressed for 10 minutes, then the charger exits Charger Setup and returns to
normal message displays.
6.2
Charger Setup Menu Selection
This section describes the Charger Setup menu selections.
•
To sequence through the Options as represented, press the right arrow.
•
To sequence through the Options in reverse order, press the left arrow.
•
Check mark identifies the current Option selection.
•
Pressing OK removes the Check mark from a selected Option or adds the Check mark to select the
displayed Option.
•
Press Back→OK to exit from the Setup menu.
Charger Setup selections are stored in non-volatile memory. Selections are not affected by cycling
charger power.
MN008300A01-AB
Chapter 6 : Charger Setup
29
Publicidad
