Publicidad
Idiomas disponibles
Idiomas disponibles
Chapter 7
Analyzer Mode
Procedure:
1 To enter Analyzer mode, press the OK button from more than 3 seconds.
The hold time is adjustable. The Analyzer mode features described are associated with charger
software version 1.05.
2 Press OK to display data available from the battery or charging pocket on the display adjacent to
the Pocket, followed by charger software version.
3 To sequence through the data, press the right arrow or to sequence through the data in reverse
order, press the left arrow.
4 To exit from the Analyzer mode, press Back→ OK.
If no keypad button is pressed for 10 minutes, then the charger exits Analyzer mode and returns to
normal message displays.
While in Analyzer mode, if the battery is removed and replaced by another battery, the last parameter
displayed for the first battery is the first parameter displayed for the second battery. For example, while
Battery IMPRES Cycles is being displayed, the IMPRES 2 battery is removed from Pocket 1 and a
different IMPRES 2 battery is inserted into Pocket 1. The first parameter display for the second battery
is the Battery IMPRES Cycles.
MN008300A01-AB
Analyzer Mode
37
Publicidad
