Erbe BiClamp 110 Manual De Instrucciones página 28

OBJ_DOKU-163748-011.fm Seite 28 Freitag, 4. September 2015 8:35 08
7.4 Recommended methods
Erbe recommends the preparation procedures described below.
Equivalent different procedures are possible if not explicitly ex-
cluded. It is incumbent on the user to ensure the suitability of the
actual procedures used by means of suitable measures (e.g. val-
idation, routine monitoring, check of material compatibility).
7.5 Dismantling
The product must be cleaned and disinfected while it is disman-
tled and the jaws are open.
1. Press both release buttons (1) at the same time and pull the
shaft tube out of the handle.
2. Unscrew the insert on the joint sleeve (2) out of the shaft
tube.
3. Pull the insert out of the shaft tube.
28