Sabo 43-4 TH Classic TurboStar Manual De Uso página 37

GB
Fault
Strong vibrations
Unclean cut, lawn is yellow
Ejection blocked
Please consult the next SABO service station
for any disorders and faults that are not shown here.
Any repairs requiring specialist knowledge should be
performed by a specialist. Your SABO service station
24
Possible cause
– Engine fixing loose.
– Blade loose.
– Blade coupling run in
eccentrically.
– Blade not balanced during
sharpening.
– Blade blunt.
– Cutting height too low.
– Engine speed too low.
– Lawn becomes matted.
– Turbo-signal has not been
heeded.
– Engine speed too low.
– Cutting height too low for grass
that is too high.
– Blade worn.
will also be happy to help you should you not wish to
carry out the mainten-ance work described above
yourself.
Remedy
– Have it checked at a SABO
service station.
– Tighten the blade securing bolt.
– Have it checked at a SABO
service station.
– Have it balanced at a SABO
service station.
– Resharpen the blade.
– Adjust to higher cutting height.
– Operate at max. rpm.
– A SABO lown scarifier can
remedy the problem con-
siderably.
– Empty the grass collector
– Operate at max. rpm.
– Adjust to higher cutting height.
– Replace the blade.