Publicidad
Idiomas disponibles
Idiomas disponibles
"glass" unsiphoned formation.
The appliance must only be
used for the purposes indicat-
ed. Any other use must be con-
sidered "IMPROPER" and therefore
the manufacturer declines all liability
for any consequent damage to per-
sons or property.
Particular safety prescriptions
(obligation-prohibitions-danger)
are detailed in the specific chap-
ter concerning these issues.
Do not obstruct the heat extrac-
tion and/or dissipation openings.
Do not leave flammable objects
or material near the appliance.
stream the appliance whenever you
need to work in safe conditions.
Whenever it is necessary to
operate inside the appliance
(connections, commissioning,
checking operations, etc.) prepare
for
the
necessary
(removal of panels, elimination of
supply) in compliance with the
safety conditions.
DUTIES AND QUALIFICATIONS
REQUIRED OF OPERATORS
Prohibition for the homogeneous
/ generic operator to perform any
type of operation (maintenance
and/or other) without having first read
the entire documentation.
The information contained
in this document is for the
use of the qualified techni-
cal operator who is authorised for: han-
dling, installation and maintenance of
the appliance in question.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
Disconnect all sup-
plies if present (e.g
gas - electrical) up-
operations
ric" operator (Operator with limited re-
sponsibilities and tasks). Person au-
thorised and employed to operate the
appliance with guards active and ca-
pable of performing routine maintenan-
ce (cleaning the appliance).
The operators who use the ap-
pliance must be trained in all
aspects concerning its function-
ing and safety features. They must
therefore interact using appropriate
methods and instruments, complying
with required safety standards.
The "Generic" operator
operate on the appliance after
the technician has completed in-
stallation (transportation, fixing electri-
cal, water, gas and drain connections).
WORK AREAS
AND HAZARDOUS ZONES /
To better define the scope of interven-
tion and the relevant work zones, the
following classification is provided:
• Dangerous zone: any zone within
and/or in proximity to a machine in whi-
ch the presence of an exposed person
constitutes a risk in terms of the health
and safety of such a person;
• Exposed person: any person that
is found wholly or partly in a dange-
rous zone.
Maintain a minimum distance
from the appliance when oper-
ating in such a way as to avoid
endangering the safety of the operator
in case of unexpected circumstances
The following are also danger
zones /
• All the work areas within the appliance
• All the areas protected by appro-
priate safety and protection systems
such as safety photocell photoelec-
tric curtains, protective panels, inter-
- 6 -
The
operating
structions
have
drawn up for the "Gene-
in-
been
must
.
Publicidad
