Mi-T-M HMT-4004-0MGV Manual Del Operador página 9

READ ALL SAFETY WARNINGS BEFORE USING PRESSURE WASHER
HAZARD
RISK OF BODILY INJURY
HMT-4004-0MGH Operator's Manual
IMPORTANT SAFETY INSTRUCTIONS
POTENTIAL CONSEQUENCE
Injury may occur from the pressure
washer.
!SAVE THESE INSTRUCTIONS!
PREVENTION
Always hold on firmly to the gun/lance
assembly when starting and operating the
unit. Failure to do so can cause the lance
to fall and whip dangerously.
Know how to stop the pressure washer and
bleed pressures quickly. Be thoroughly
familiar with controls.
Follow the maintence instructions specified
in the manual.
Do not leave pressurized unit unattended.
Shut off the pressure washer and release
trapped pressure before leaving.
Do not operate the unit if you see any fuel,
oil or water leaks from the machine. Do not
resume operation until the unit has been in-
spected and repaired by a qualified service
person.
Never run the unit with the governor dis-
connected or operate at excessive speeds.
Place unit in a clean, dry, flat area for
servicing. Before servicing the unit: turn
the unit off, relieve the water pressure from
the trigger gun, and allow the unit to cool
down. Service in clean, dry, flat area. If ap-
plicable, block wheels to prevent unit from
moving.
Do not move the unit by pulling on the
hose.
9