Volkswagen 5G0 092 101 C Instrucciones De Montaje página 36

Position the rubber grommet fitted to the wiring harness and insert into the opening hole from the
luggage compartment to the outside.
Fasten the wiring harness at the intended position on the edge of the rear body panel plate using the
white clip and use the supplied 377mm cable ties to affix it to the towing hitch cross-member.
(See fig. 3)
Fig. 3:
Insert the three 6-pin, 10-pin and 24-pin connector housings of the wiring harness into the intended
slots in the trailer connection unit and click into place.
Then secure the trailer connection unit at the intended position on the rear left side when using the
required module mounting. (See fig. 4)
Fig. 4:
20.03.2014-051663 10 / 78