Technical Data - Auerswald COMpact 5200 Manual De Instrucciones

• If you are still uncertain about how to use the product properly after reading the chapter
below, please contact your specialised dealer.
• Read the instructions for the device and keep them for future reference.
• In order to use some of the features, it is necessary to extend the hardware, release it in
the Upgrade-Center, contact the network provider about activating the feature and/or set
up via the PBX configuration manager.
The COMpact 5200, COMpact 5200R and COMpact 5500R devices are telecommunication
systems; they will be referred to as PBXs in the following. These PBXs connect various inter-
nal devices with various public telecommunication networks, thereby enabling external and
internal calls. For this purpose, the PBXs provide a number of different ports/interfaces. The
PBXs are structured modularly. They are suitable for use in the commercial sector (small to
midsize companies).
The COMpact 5200 is a PBX with a plastic casing available for wall mounting.
The COMpact 5200R and COMpact 5500R are PBXs with a 19" casing available for instal-
lation in a 19" rack. They are suitable for use in structured IT/telecommunication networks.
The PBXs are intended to be operated in closed rooms. In addition, all of the devices con-
nected to the system must be located in the building.

Technical Data

Power Supply
Rated voltage
Rated current
Protection class
Power (depending on the con-
figuration level of the PBX)
Expansion modules
Environmental Requirements
Operation
Operating the modules
Storage and shipping
Humidity
COMpact 5200/5200R/5500R - Instructions V01 03/2017
230 VAC +/-10 %, 50 Hz
Max. 0.4 A
I
COMpact 5200: min 8 W, max. 70 W
COMpact 5200R/5500R: min. 10 W, max. 70 W (min. 8 W
if fan is off)
Power supply from the PBX
0 to +40° Celsius
Protect unit against direct sunlight!
Installed in the PBX casing
-20 to +70° Celsius
10 to 90 %, non-condensing
Important Information
35