Turning On The Pbx; Commissioning (Compact 5200R/5500R); Rack Mounting The Pbx - Auerswald COMpact 5200 Manual De Instrucciones

Requirements:
• Cables carefully reinserted into the cable
space after installation
1. Place the upper edge of the cover onto the
top of the casing.
2. Press the lower edge of the cover against
the casing until it clicks into place.

Turning on the PBX

Warning: Touching voltage-carrying conductors or telephone connections can cause
life-threatening electric shocks.
• Close the casing before you put the PBX into operation.
Note: If you have a USB memory stick with a configuration for automatic loading (aucon-
fig.cfg), insert it into the USB socket (USB host) of the CPU module before you switch on the
PBX. The configuration data stored on the USB memory stick will automatically be saved to
the PBX after switching on. The PBX restarts afterwards.
Requirements:
• PBX connected to earthing and casing closed
Connect the PBX to a freely accessible Schuko socket.
The Power and Status LEDs light up several seconds/minutes in
red and orange.
When the LEDs light up in green, the PBX is ready for operation.
Note: If the Power LED remains continuously lit in red, an error has occurred. Please contact
your dealer or the manufacturer directly.

Commissioning (COMpact 5200R/5500R)

Rack Mounting the PBX

Warning: Touching voltage-carrying conductors or telephone connections can cause
life-threatening electric shocks.
• Mount the PBX close of an earth wire (potential compensation bar of the house installation
or protective earth conductor). Connect the PBX's earth connection to the earth wire with
a connecting cable whose conductor diameter is at least 2.5 mm
COMpact 5200/5200R/5500R - Instructions V01 03/2017
Commissioning (COMpact 5200R/5500R)
²
.
45