RIB SLIDER 2.0 Manual página 48

WARN List of the last 10 warnings
11.4 MEM MENU
ID Description
FSET Back to factory settings
FW Fw upgrade on board
SIN Settings loading from USB
SOUT Settings saving on USB key
11.5 ADV MENU (Advanced)
ID Description
OSSM Slowing down space of the door during
the opening in case of side safety sensor
activation (OS-R, OS-L)
ATTENTION: when selecting this parameter you
must consider the risk assessment
OSSS Stopping distance of the door during the
opening in case of side safety sensor
activation
(OS-R, OS-L)
ELLK Locking operating mode
TYLK Type of lock
PIPP Leaf open check enabled
PUCL Thrust force with door closed (anti-wind
function)
HOLD Maintenance force with door open (anti-wind
function)
TS Safety sensors test enabling
PUGO Push and Go
VTAC Variable automatic closure time
MOT Manual sliding configuration of the door
(operation only with door powered)
The warnings are put in the order form the latest to the
oldest (0.xxx ... 9.yyy)
Values Notes
NO/YES
Name of upgra- Select the Firmware version to upgrade from those available.
de files The upgrade files should be inserted in the path -ON-DS/
*(NOMS) SLIDING/FW/
*If NOMS appears, the USB pen is not detected or absent
NO/YES Loading files from -ON-DS/SLIDING/SET/
*(NOMS) *If NOMS appears, the USB pen is not detected or absent
NO/YES File saving in -ON-DS/SLIDING/SET/
*(NOMS) *If NOMS appears, the USB pen is not detected or absent
Values Notes
YES Reduced speed on all the passage compartment
100 - 500 [mm] Space in [mm] at reduced speed in the final part of the stroke
(equal to 100mm/s)
NO Disabled function
NO Disabled function
100 - 500 [mm] Stopping distance in [mm] in the final part of the stroke
AUTO Automatic mode: automatic detection of the lock presence, if
present the locking control adapts to the operating mode of the
door selected
LOCK Lock always lowered on closed door
UNLK Lock always unlocked (except in night mode)
LK1 Secure monostable lock (99EB0001-99EB0006)
LK3 Bistable lock (99EB0004)
LK2 Safe monostable lock (99EB0003)
NO/YES YES = check enabled, on each opening, the open position is
checked by pushing on the leaf stop
NO No thrust
MAX 3 force levels applied
MED
MIN
NO No maintenance of open door
MAX 3 maximum strength levels applicable to keep the door in the
MED open position
MIN
NO/YES YES = Sensors test enabled
NO/YES YES = Manual movement of the leaf from closed position causes
opening
NO/YES YES = In case of heavy passage of people, after 5 consecutive
inversions the door increases the automatic closure time by 5
seconds
OC Windings open - Manual opening with little friction
SC Short-circuited motor windings
Manual opening of the door with greater resistance
16