Engine Oil And Oil Filter Element - Yamaha Raptor 700 Manual Del Propietário

Engine oil and oil filter element

The engine oil level should be checked before

each ride. In addition, the oil must be changed

and the oil filter element replaced at the intervals

specified in the periodic maintenance and lubri-

cation chart.

To check the engine oil level

1. Place the ATV on a level surface.

2. Start the engine, warm it up until the

engine oil has reached a normal tempera-

ture of 60 ° C, let it continue to idle for ten

seconds or more, and then turn the engine

To achieve the proper engine oil temperature for

an accurate oil level reading, the engine must

have first completely cooled down, and then

warmed up again for several minutes to normal

operating temperature.

Mostrar enlaces rápidos