Publicidad
Idiomas disponibles
Idiomas disponibles
FR
INTRODUCTION
Your new tool will more than satisfy your expectations. It has been manufactured under stringent
Quality standards to meet superior performance criteria.
ES
You will find your new tool easy and safe to operate and with proper care, it will give you many
years of dependable service.
PT
CAUTION. Carefully read through this entire instruction Manual before using your new Power
Tool.
Take special care to heed the Cautions and Warnings.
IT
ENVIRONMENT PROTECTION
This symbol is known as the 'Crossed-out Wheelie Bin Symbol'. When
EL
this symbol is marked on a product or battery, it means that it should not
be disposed of with your general household waste. Some chemicals con-
tained within electrical/electronic products or batteries can be harmful to
health and the environment.
PL
Only dispose of electrical/electronic/battery items in separate collection
schemes, which cater for the recovery and recycling of materials con-
tained within. Your co-operation is vital to ensure the success of these
UA
schemes and for the protection of the environment.
DESCRIPTION OF SYMBOLS
RO
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
EN
Wear hearing protection.
Wear eye protection.
Wear respiratory protection.
Conforms to relevant safety standards.
Double insulated for additional protection.
Read the instruction manual.
176
SPECIFICATIONS
Voltage:
230-240V~50 Hz
Power Rating:
500 W
No Load Speed:
0-2800min
Chuck Capacity:
1.5-13mm
Drilling Capacity:
wood-20mm
steel-10mm
masonry-13mm
Weight:
1.4kg
This tool is double insulated. There are two independent barriers of insulation to protect you from
the possibility of electric shock.
NOISE AND VIBRATION DATA
A weighted sound pressure..............................................................................................
A weighted sound power................................................................................................
Uncertainty.........................................................................................................................
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures
are necessary.
VIBRATION
The European Physical Agents (Vibration) Directive has been brought in to help reduce hand arm
vibration syndrome injuries to power tool users. The directive requires power tool manufactur-
ers and suppliers to provide indicative vibration test results to enable users to make informed de-
cisions as to the period of time a power tool can be used safely on a daily basis and the choice of
tool. Further Advice can be found at www.hse.gov.uk
This product has been measured under test conditions for Vibration
Test Method: EN62841
Measured vibration emission value
Typical weighted vibration
Impact drill into concrete........................................................................................... ... ...
Drill into metal...............................................................................................................
Uncertainty ......................................................................................................................
The measured vibration emission value quoted above should be used as a minimum level should
be used with the current guidance on vibration.
-1
96 dB(A)
107 dB(A)
5 dB(A)
7.68 m/s
2.92 m/s
1.5 m/s
177
FR
ES
PT
IT
EL
PL
UA
RO
EN
2
2
2
Publicidad
