Stahlwille MANOSKOP 714 Manual De Instrucciones página 83

Preparing the torque and angle wrench
Preparing the torque and
angle wrench
Prerequisites for use
 The user must be standing securely during use.
 Sufficient freedom of movement must be available
for the user.
 The operating location must be sufficiently bright.
 The operating temperature must be –10 °C to
+40 °C.
 Prior to use, the torque and angle wrench must be
able to adapt to the climatic conditions during
subsequent use for at least one hour.
 The torque and angle wrench must be protected
against harmful influences caused e.g. by soiling
or moisture.
The menu language set on delivery is German.
 To change the menu language, proceed as
described from page 41.
Inserting batteries
Make sure that the current supply for the torque and
angle wrench is guaranteed. The following battery
or rechargeable battery types may be used:
 Micro batteries AAA/LR03, 1.5 V.
 Micro NiMH rechargeable batteries AAA/LR03,
1.2 V
 Optional li-ion rechargeable battery with charger
(art. No. 7195-2)
CAUTION
Danger due to exploding rechargeable
batteries.
 Use the correct charger to charge
each of the rechargeable battery
types.
 Turn the cover counter-clockwise to stop.
 Remove the cover.
 Insert the rechargeable batteries or batteries,
observing the polarity specified on the handle.
 Insert the lock in the cover into the battery
compartment recesses.
 Press the cover on gently.
 Turn the cover clockwise to stop.
23