IRUDEK SEKURBLOK Manual De Instrucciones página 9

REPAIR: Any repair shall only be carried out by equipment manufacturer or his authorized
representative following manufacturer's procedures.
MARKING The equipment is marked with the next
information:
i ) CE marking, Conformity to European Legislation
ii ) Identification of the manufacturer
iii ) Reference of the equipment
iv ) Lot number or serial number
v ) Year of manufacture
) European Norm
vi
) Notified body number
vii
) Pictogram to indicate the necessity
viii
for user to read the instruction for use
INSTRUCTIONS FOR PERIODIC EXAMINATIONS
It is necessary to carry out regular periodic examinations. The safety of the users depend
upon the continued efficiency and durability of the equipment.
The personal protective equipment shall be examined at least every 12 months. The periodic
examination can only be carried out by the manufacturer or his authorized representative.
The comments should be included in the check card of the equipment. After the periodic
examination, the next due date for periodic examination will be determined.
During periodic inspection it is necessary to check the legibility of the equipment marking.
The check card should be filled in before the first use.
All information about the personal protective equipment ( name, serial number, date of
purchase and date of putting into operation, user name, periodic examination and repair
history, and next periodic examination date ) shall be noted into de check card. All records in
the check card can only be filled in by a competent person. Do not use the personal protective
equipment without a duly filled check card.
REFERENCE
SERIAL, LOT NUMBER
YEAR OF MANUFACTURE
IT CAN BE USED WITH
DATE OF PURCHASE
DATE OF FIRST PUT INTO USE
USER NAME
COMMENTS
CHECK CARD
EQUIPMENT RECORD