Motor Cooling; Storing The Machine - Stihl 160 C Manual De Instrucciones

English
Otherwise the drive links will grind
against the base of the groove – the
bottoms of the cutters and the tie straps
will not lie against the bar.
80

Motor Cooling

Periodically clean the ventilation
N
slots with a dry brush or the like

Storing the Machine

Move the hand guard to ƒ.
N
Remove the battery.
N
Turn the machine upside down and
N
shake it – remove chips from battery
compartment.
Remove the saw chain and guide
N
bar, clean them and spray with
corrosion inhibiting oil.
Thoroughly clean the machine,
N
especially the cooling air inlets.
If you use a biological chain and bar
N
lubricant, e.g. STIHL BioPlus,
completely fill the chain oil tank.
Store the machine in a dry and
N
secure location – out of the reach of
children and other unauthorized
persons.
Cover for Battery Compartment
In some markets the machine comes
with a cover for the battery
compartment. It protects the battery
compartment from contamination.
After finishing work, slide the
N
cover (1) home until it engages
audibly in position.
MSA 160 C, MSA 200 C
1