Publicidad
Idiomas disponibles
Idiomas disponibles
FUEL MIXING
T he fuel tank has a maximum capacity of 1.5l. To mix the fuel correctly, use the fuel mixing bottle to
measure the correct amount of oil to petrol.
Warning! Do not mix the fuel in the hole borer fuel lank. Measure the fuel into the fuel mixing bottle
then add the correct proportion of two stroke oil according to the markings on the fuel mixing bottle.
Agitate the container to ensure thorough mixing of the petrol and oil.
FILLING THE FUEL TANK
Use a suitable funnel to transfer the fuel mix from the container to the hole borer fuel tank, taking
care not to spill any fuel or over fill the fuel tank.
Please note that for safety reasons this product has been supplied with the fuel system completely
drained of fuel and the engine will require "running In".
When starting for the first time you may experience some difficulty in startlng the hole borer. Once the
fuel has fully circulated through the system the hole borer will start. Once started and "run in" future
starting will be easier.
STARTING THE ENGINE (Pics. 4 to 7)
Gently agitate the fuel mix by gently rocking the hole borer backwards and forwards a few times.
This will ensure that the two stroke oil has not settled out from the petrol.
Set the choke lever to the On position (Pic. 4).
If the carburetor requires "priming", pump the clear rubber priming button (Pic. 5) until fuel appears
in the clear rubber priming button.
38
Publicidad
