Start-Up; Setting Up - melitta CAFFEO SOLO&milk Manual De Instrucciones

4 Start-up

When starting the appliance for the first time, please execute the following tasks.
When you have completed these steps the appliance is ready for operation. You can
now prepare coffee. We recommend pouring away the first two cups of coffee after
first start up.

Setting up

•
Place the appliance on a stable, level and dry surface. ensure that there is a
distance of 10 cm to the wall and other objects.
• the sOLO &milk has two rollers on the back edge of the appliance. It
®
can be easily moved by lifting slightly at the front.
Caution!
– Never place the appliance on hot surfaces or in wet areas.
– Do not transport or store the appliance in cold vehicles or rooms with
low temperature because the residual moisture could freeze and damage
the appliance. Follow the instructions on page 77.
• the coffee grounds container is located in the drip tray. Please ensure that
the drip tray is pushed into the appliance all the way to the stop.
Notes
–
In order to avoid transport damage, keep the packaging material, includ-
ing the hard foam elements, in case it is needed for transport and pos-
sible return shipments.
–
It is normal to find traces of coffee and water in the machine before it is
started up for the first time. This is because the appliance was tested for
faultless function in the factory.
51