Heating Milk - melitta CAFFEO SOLO&milk Manual De Instrucciones

8 Heating milk

Prerequisite: The appliance must be ready for operation.
• Push the chrome-plated outer cover of the steam pipe upwards
(Fig. J, No. 2).
•
hold the vessel containing the milk under the steam pipe. ensure that the
tip of the steam pipe is immersed in the milk.
•
Press the button for steam dispensing
→
the standby symbol
symbol for the valve
Warning!
There is a risk of burn injuries and scalding due hot steam and the
hot steam pipe.
– Never reach into the escaping steam.
–
Never touch the steam pipe during use.
•
turn the valve switch (Fig.
→
the valve symbol
heat the milk. You will achieve better results if you move the vessel with milk
up and down while heating.
• As soon as the desired milk temperature is reached, turn the valve switch
anticlockwise to close the valve and end the heating process.
• Rinsing the steam pipe:
Fill a vessel halfway with clean water and hold the vessel under the steam
pipe.
ensure that the tip of the steam pipe is immersed in the water.
Open the valve for about five seconds and then close it again.
•
After 30 seconds, the appliance switches automatically from steam mode
to normal operating mode. Press the button for steam dispensing
switch to the normal operating mode prematurely.
60
.
is flashing. The appliance heats up. Subsequently the
will be illuminated.
A, no. 11) clockwise to open the valve.
will flash. Hot steam coming out of the steam pipe will
to