Resetting To Factory Settings - melitta CAFFEO SOLO&milk Manual De Instrucciones

Display
• Press the on/off button
→ All symbols in the display flash briefly for confirmation. The appliance is
ready for operation, the standby symbol

Resetting to factory settings

to reset the device to the factory settings, execute the following points:
Prerequisite: The appliance is ready for operation, the standby symbol
is illuminated.
• simultaneously press the button for steam dispensing
Off button
→
All settings will be reset to the factory settings. the standby symbol
flash briefly for confirmation.
Overview of factory settings:
Function settings
Water hardness
energy-saving
standby mode
Auto-off function
Brewing temperature
Brewing temperature
low
medium
(factory setting)
high
to confirm the selected brewing temperature.
for more than two seconds.
Factory setting
Water hardness 4
Level 1 (5 minutes)
Level 1 (1 hour)
Level 2 (medium)
is illuminated.
and the On/
will
67