melitta CAFFEO SOLO&milk Manual De Instrucciones página 77

4 Add the descaling powder to a separate vessel with 0.5 l hot water. stir in
the descaling powder (e.g. with a long spoon).
Warning!
The descaling agent can cause skin irritations
Comply with the safety instructions and the dosing information specified
on the descaling agent packaging.
5 As soon as the descaling powder is completely dissolved, pour the descal-
ing agent into water reservoir.
6 Re-insert the water reservoir.
7 Press the button for steam dispensing
programme.
→ Phase 1 is completed.
Phase 2
During Phase 2, two bean symbols
→
The Integrated Descaling programme will start. Water flows inside the appli-
ance into the drip tray in multiple intervals. this stage lasts approximately 15
minutes. subsequently the symbol for the valve
8 ensure that the coffee grounds container is placed under the steam pipe.
9 turn the valve switch (Fig. A, no. 11) clockwise to open the valve.
→
Water will flow intermittently out of the steam pipe into the coffee grounds
container. the symbol for the valve
quently, the symbol for the drip tray
10 Leave the valve open.
11 empty the coffee grounds container and the drip tray and then re-insert
the drip tray. Place the coffee grounds container back under the steam
pipe.
→ the symbol for the water reservoir
12 Rinse out the water reservoir and fill it with tap water to the Max. marking.
to start the integrated cleaning
are shown on the display.
will be illuminated.
flashes during this process. Subse-
will be illuminated.
is illuminated.
75