Publicidad
Idiomas disponibles
Idiomas disponibles
At the following conditions: condenser inlet air temperature 35°C; chilled water temperature 7°C; temperature differential at the evaporator
(*)
5 K; fouling factor of 0 m2 K/W.
In the following conditions: Evaporator inlet air temperature 7°C D.B., 6°C W.B.; hot water temperature 45°C; temperature differential at
(**)
condenser 5 K; fouling factor of 0 m2 K/W.
Sound pressure level in dB(A) referring to a 10 m distance from the unit, in free field and directionality factor equal to Q=2 in accordance
(***)
with standard UNI EN-ISO 3744. The noise data refers to the units without the electric pump
Sound power level in dB(A) on the basis of measurements taken in accordance with UNI EN-ISO 9614 and Eurovent 8/1 Standards. The
(****)
noise data refers to the units without the electric pump
Recovery unit heating capacity Conditions referring to the unit operating with chilled water temperature 7°C, differential temperature due to
(±)
evaporation of 5 K, hot water temperature produced equivalent to 40/45°C (RC100-DS). N.B. With heat pumps operating in winter mode
with DC active, the heating capacity available is decreased from the portion supplied to the desuperheater.
Absorbed current/absorbed power value without electric pump
(■)
The peak current refers to the unit's most heavy duty operating conditions.
Data calculated in accordance with EN 14511 under nominal conditions.
(°)
Length with ASP/ASDP accessory
(ç)
Seasonal energy efficiency: low temperature cooling (EU Regulation 2016/2281)
SEER
Seasonal energy efficiency: low temperature heating in Average climate (EU Regulation No. 811/2013 and N. 813/2013)
SCOP
The refrigerant charge values are indicative. Refer to the serial number plate.
IOM_EQRU-SS_EQRHU-SS_2160a4350_208676_230601_ES-EN-FR-DE-IT
109
EQRU-EQRUSS
EQRHU-EQRHUSS
Publicidad
