Publicidad
Idiomas disponibles
Idiomas disponibles
7 Product Specifications
Technical data
Light source
Wavelength range
Light intensity
Operation
Light guide
Signal transmitter
Dimensions of the handpiece
(without light guide)
Weight of the handpiece
Operating voltage of the handpiece
Operating voltage of the charging base
Power supply
Operating conditions
Dimensions of the charging base
Weight of the charging base
Charging time
Power supply of the handpiece
Transportation and storage conditions
Delivery form
18
Ivoclar Vivadent Polywave® LED
385–515 nm
Peak 1: 400–410 nm
Peak 2: 450–465 nm
Turbo program: 2, 1 00 mW/cm
High Power program: 1,200 mW/cm
PreCure program: 950 mW/cm
3 min on / 7 min off (intermittent)
10 mm, autoclavable (active surface 0.61 cm
Beeps every 10 seconds and every time the Start/Stop button or the
Time/Program selection button is activated
L = 170 mm, B = 30 mm, H = 30 mm
135 g (including battery and light guide)
3.7 VDC with battery
5 VDC with power pack
100–240 VAC, 50–60 Hz, max 0. 1 A
Input: 100–240 VAC / 50–60 Hz max 1 A
Output: 5 VDC / 3 A
Manufacturer: EDAC POWER ELEC.
Typ: EM1024B2
Temperature +10 °C to +35 °C
Relative humidity 30 % to 75 %
Ambient pressure 700 hPa to 1060 hPa
D = 110 mm, H = 55 mm
155 g
Approx. 2 hours (with the battery empty)
Li-ion battery (approx. 20 min. with a new, fully charged battery in
the High Power program)
Temperature –20 °C to +60 °C
Relative humidity 5 % to 90 % , non condensing pressure
500 hPa to 1060 hPa
The curing light has to be stored in closed, roofed rooms and must
not be exposed to severe jarring.
Li-ion battery:
– Do not store at temperatures above 40 °C / 104 °F
(or 60 °C / 140 °F for a short period). Recommended storage
temperature 15–30 °C / 59–86 °F
– Keep the battery charged and store no longer than 6 months.
1 Charging base with power cord and power pack
1 Handpiece
1 Handpiece support
1 Light guide 10 mm
1 Anti-glare shield 3 Anti-glare cones
1 Pack of sleeves
1 Instructions for Use
± 10 %
2
± 10 %
2
± 10 %
2
)
2
Publicidad
