Publicidad
Idiomas disponibles
Idiomas disponibles
xFUME POWER 350
Electric shock due to defective cables
The use of damaged or improperly installed cables may result in a potentially fatal electric shock.
► Check all live cables and connections for proper installation and damage.
► Have any damaged, deformed, or worn parts replaced by a qualified electrician only.
Risk of crushing
Limbs can be crushed if device components are improperly installed or uninstalled.
► Keep your hands out of the danger zone.
► Check and wear your personal protective equipment.
Health risk caused by cleaning with compressed air
When cleaning with compressed air, dust and/or dirt particles that are hazardous to health can get into
the ambient air and be inhaled.
► Replace dirty or clogged filters.
► Check and wear your personal protective equipment.
Health risk caused by inhaling harmful dust
The device contains harmful dust that can collect on surfaces and penetrate the ambient air as of the first
use. It can damage the respiratory tract when inhaled.
► Check and wear your personal protective equipment.
► Use the device only in rooms with sufficient ventilation.
► Ensure that all seals on the device are free from dirt and debris.
► The provided filtration system must be used when operating the device.
► The dust collecting container must be closed when operating the device.
► Do not open the dust collecting container until at least one minute has passed since the device was
► Keep the device closed during operation and during the cleaning process.
► Immediately remove dust deposits from the environment with a dust class H industrial vacuum cleaner
Risk of injury due to unexpected start
If power is supplied during maintenance, cleaning or disassembly, rotating parts can start running
unexpectedly and lead to injuries from cuts.
► Switch off the device.
► Disconnect all electrical connections.
Fire hazard due to contamination
Dust deposits inside the device can lead to a reduction in insulation. This can cause short circuits or fires.
► Clean the device at regular intervals with dried compressed air to remove dust and welding fume
WARNING
WARNING
WARNING
WARNING
switched off.
or a damp cloth.
CAUTION
CAUTION
residues.
9 Maintenance and cleaning
EN - 33
Publicidad
