Bowa TissueSeal PLUS Instrucciones De Uso página 66

5 Operation
5.3.
22 TissueSeal / TissueSeal PLUS
Changing the output power of the HF device
Before increasing the output power of the HF device,
check:
•
all HF cables and connectors are properly
connected;
•
the ligation instrument is properly connected
(see the operating instructions of the HF
device);
•
the foot switch works properly;
•
the insulation of the HF cable C,
•
the active electrodes of the jaws A are clean
and not worn out.
Withdrawal
WARNING
Risk of patient injury due to damaged or broken-off
parts!
Check the ligation instrument after each use. All parts
must be present.
MN031-443-S0-20110112-EN