Handling; Storage; Dimensions; Cap 4 Installation - Colged TopTech 31-22.1 Manual De Instrucciones

Storage methods for materials must include pallet, containers, conveyor belts, vehicles, lifting equipment
and devices suitable for the prevention of damages caused by vibration, impact, abrasion, corrosion,
temperature or any other condition that may occur. The parts stored must be periodically inspected for
deterioration.

Storage:

Transportation and deposit: between -10° C and 55° C, with peaks of up to 70° C (max 24 hours)
The machines of the rack conveyor line are available in various models, whose layouts are attached to
this document, including the dimensions of each machine.
Definition of hazard zones and how (see fig. on next page) they are indicated, plus a general description
of the protection measures adopted.
MDITT31-(r06)
DISHWASHER INSTRUCTIONS MANUAL

The machines must be handled with care, using a forklift truck or a hand
pallet truck.

The hoisting points are marked on the machine by adhesive labels.

During transportation, it is forbidden to remain near the machine, as it
may tilt and cause serious harm to persons nearby.

Accidents may involve impact, entanglement, and trapping by the
machine during handling and storage of the machine itself.
Risk of entanglement and dragging
- On the conveyor
Thermal hazard
- on the doors accessing the wash / rinse section
- on the drying chamber walls.
- on the boiler during machine installation and maintenance.
- Inside the machine for removal of the wash tank overflow.
Electrical shock hazard
- electrical control panel
- electropumps
- fan
- electrical elements

Handling

Storage

Dimensions

Cap 4
INSTALLATION

Hazard zones

Page 7 of 33
UK