Commissioning; First Boiler Loading; Machine Equipped With Double Boiler - Colged TopTech 31-22.1 Manual De Instrucciones

Reference figure 2

Open the supply water gate valve (fig.2/A)

Connect the electric power supply using the master switch (fig.2/B)

The line key (1) lights up in red (fig.2/C)

Press the line key (1) to switch the machine on (fig.2/C)

The line key (1) turns green and the display shows the icons of the various languages that can be
selected (fig.2/D)

Press the icon of the desired language directly on the display (fig.2/E)

The icon of the program selected is highlighted in the box and shown on the display (fig.2/E)

Confirm the selection by pressing the exit icon (fig.2/F)

Select the water supply temperature using the range indicated successively (fig.2/G)
Cold water (10°C  50°C)
Hot water (50°C  65°C)

Press the confirm icon to activate the boiler load procedure (and dosing devices if envisioned);
pressing the X key the procedure is annulled (fig.2/H)

The machine starts to load the boiler automatically (and dosing devices if installed), showing the
time passed and the residual time on the display (fig.2/I)

When the display shows the boilers loaded successfully message, press the confirm key and the
machine is ready to be switched on. (press the "X" key to annul the loading process) (fig. 2/L)
Reference figure 12
For versions equipped with a second boiler, after following the instructions given in the paragraph above,
proceed as follows to activate the heating of the elements.

Disconnect the power supply using the main switch (fig.12/A)

Remove the panel under the rinse section (fig.12/B) to access the electrical control panel

Remove the cover of the control panel and access the terminal board (fig.12/C)

Activate the electrical element by connecting the two terminals indicated in figure 12/D with the wire
supplied
Refit the electrical control panel cover and the panel.
MDITT31-(r06)
DISHWASHER INSTRUCTIONS MANUAL

5.8.2 Machine equipped with double boiler

COMMISSIONING

5.8.1 First boiler loading

Page 15 of 33
UK