Connection To The Drain Network; Wash Tank Connection - Colged TopTech 31-22.1 Manual De Instrucciones

UK
Warning!

Machines intended for use with desalinated water or in any case with water having a high
concentration of sodium chloride, must be expressly ordered, as their construction requires the
use of specific materials.
The machine is supplied complete with corrugated drain hoses and connectors for each tank to be used
in the event that the drainage water is to be channelled into a single drain outlet equipped with a syphon
as described in the following paragraph.
These drain hoses are not recommended for use in the event of direct drainage into a sump.
Page 12 of 33
DISHWASHER INSTRUCTIONS MANUAL

Rack conveyor dishwashers operate continuously, which means
they require particularly efficient and functional drainage systems.

For the position of drains on each tank and the exact dimensions,
refer to the installation diagram enclosed with each machine.

Connect the machine's drains to the mains drainage using hoses
designed to withstand a continuous temperature of 70°C, using the
connectors supplied if necessary.

The drainage system must always include a siphon, even in the case
of direct drainage into a sump as illustrated in the figure

In the case of multiple wash tanks, they may all be connected to a
single siphon

The height from the ground of the siphon "H" must not exceed the
height B of the drain pipe as illustrated in the figure.

Connection to the drain network

5.3.1

Wash tank connection

MDITT31-(r06)