Stop Device; Display Of Temperatures - Colged TopTech 31-22.1 Manual De Instrucciones

UK
General purpose
general use program.
Prolonged contact
assures a contact time of 120" in compliance with the DIN 10534 Standard
Glasses
When this program is selected, a system that lowers the boiler temperature to 65 °C is started automatically
when the first basket of glasses transits under the rinse. There are no stand-by times (requires the
appropriate use of baskets measuring 50x50 cm)
Intensive
for difficult to remove dirt, with washing temperature taken to 63 °C
The machine has an emergency switch (4) on the control board and its activation causes the immediate
shutdown of all moving parts and the wash program.
The possibility of installing additional optional stopping devices in proximity of the basket entrance and exit is
envisioned.
Reference fig. 6
The wash and rinse temperature values can be displayed at any time.
Just press the box on the right of the display (fig.6/A) during washing.
The main wash "W2", upper rinse "B1" and lower rinse "B2" water temperatures are shown on the display.
(fig.6/A)
Press again to hide the message.
Page 20 of 33
DISHWASHER INSTRUCTIONS MANUAL

Stop device

Display of temperatures

MDITT31-(r06)