End Of Washing Operations - Colged TopTech 31-22.1 Manual De Instrucciones

Er31
Boiler 2 probe "closed"
Er32
Tank 2 probe "open"
Er33
Tank probe "closed"
Warning:
When the machine is switched off and then on, the alarm is initially reset, but will be displayed again if the
cause of the problem is not solved.
With reference to Figure 17

Stop the machine using the line button (Fig. 17/A)

Switch off the wall-mounted main switch (Fig. 17/B)

Open the doors, making sure they are firmly hooked to their supports. (Fig. 17/C)

Remove the horizontal filters, being particularly careful so as not to drop residues of food inside the
washing tank. (Fig. 17/D)

Lift the vertical filter and dispose of its contents. Use a hard brush to rinse the horizontal and the vertical
filters. (Fig. 17/D)

Slide out the overflow and allow the tank to drain. (Fig. 17/F)

Accurately wash the bottom of the tank with a jet of water.

Accurately wash the curtains.

Remove any traces of dirt from the empty tank. At this point only, remove the safety filter of the pump
and wash it under running water. (Fig. 17/G)

The external parts of the machine must be cleaned when their surfaces are cool, using a sponge and
non-foaming products that must be neither acid nor abrasive.

Reinsert the overflow devices, the safety filters and the tray filters.
The machine is now ready to use.
WARNING: Do not wash the machine with water streams or high-pressure water directly applied to
it, as any leaks into the electric components may compromise the regular function of the machine
and of its safety systems, annulling the warranty.
It is advisable to leave the doors open, to avoid the formation of unpleasant smells.
MDITT31-(r06)
DISHWASHER INSTRUCTIONS MANUAL
broken.
Heating is prevented. Contact the after-sales assistance
centre
The probe that measures the second wash tank
temperature is broken.
Heating is prevented. Contact the after-sales assistance
centre

End of washing operations

Page 29 of 33
UK