Publicidad
Idiomas disponibles
Idiomas disponibles
8. Mount Switch assembly towards power unit column
as shown, Fig. 7, using (2) 1/4"-20NC x 3/4" lg. HHCS, nuts
and Washers.
Fig. 7
Fig. 7a
(2)--3/4" Spacers
1/4"-20NC x 2-3/4" HHCS & Locknut
1/16" Gap
Insert 1/4"-20NC x 2-3/4" HHCS through pivot hole in end
of switch bar. Insert opposite end of bar through slot in
switch mounting bracket, Fig. 7a. Then secure HHCS and
Switch Bar to overhead as shown, Fig. 7, using (2) 3/4"
spacers and 1/4"-20NC Locknut. Tighten Hex bolt leaving
1/16" gap between the spacer and the overhead assembly.
Star Washer
Flat Washer
Overhead Switch
8
(2) 1/4"-20NC-3/4" HHCS
Fig. 7a
COVER NOT SHOWN
Publicidad
