JOST KKS-U Instrucciones De Montaje Y Funcionamiento página 67

6 Installation
Figure 17: Valve unit holder, installing the connection pieces
Screw the vehicle-specific connection pieces (11) into the
open connections of the line filters (5) and 2-way valves (6),
as shown in Figure 17.
IMPORTANT!
Choose connection pieces that match the cross-sec-
tional area of the semi-trailer's air hoses. The supplied
connection pieces are intended for hoses with a cross-
sectional area of 8 x 1 mm. If your hoses have a differ-
ent cross-sectional area, you will need to purchase the
connection pieces separately.
ADVICE!
See Figure 9 for an overview of components.
Figure 18: Valve unit holder, coloured marking
WARNING!
Do not connect the hoses of the brake and supply cir-
cuits to the same valve circuit. This is the responsibility
of the installer.
MUB 007 004 M01 (REV--) 05-2023 67