Publicidad
Idiomas disponibles
Idiomas disponibles
6
Installation
ATTENTION!
Make colour markings on the valve unit or label it, so
that the valve circuits will be connected to the correct
compressed air circuit during installation. This will pre-
vent potential incorrect installation. We recommend
positioning the valve circuit for the compressed air sup-
ply circuit on the right in the direction of travel, and the
valve circuit for the air brake circuit on the left in the
direction of travel (see Figure 18, for example).
6.2
Installing the cable store
Figure 19: Cable store
The cable store shown in Figure 19 performs two important func-
tions:
68
Guides the central wiring harness when cornering.
Protects the central wiring harness from damage.
Figure 20: Cable store installation space
L = 1,390 mm ± 5 mm
W = 420 mm
b = 210 mm
MUB 007 004 M01 (REV--) 05-2023
ATTENTION!
Correct and careful installation of the cable store greatly
helps to ensure the optimum function of the system as
a whole.
bm= up to 310 mm
H ≥ 50 mm + 5
Publicidad
