Craftsman 126.32565 Manual Del Operador página 33

Select the required miter angle as
previously described in MAKING A
MITER CUT.
Select the required bevel angle as
previously described in MAKING A
BEVEL CUT.
Ensure the tightness of all adjustment/
locking screws before making a cut.
(Fig. Z)
®
\ _S ¸¸
(Fig. Y)
CUTTING BOWED MATERIAL
Before cutting any workpiece, check to see if
it is bowed. If it is bowed the workpiece must
be positioned and cut as shown. (Fig. Z)
Do not position the workpiece incorrectly
or cut the workpiece without the support
of the fence.
FREEING JAMMED MATERIAL
Release the trigger switch and allow the
blade to come to a stop.
Unplug the miter saw.
Remove the jammed material.
Check the operation of the safety guard.
CUTTING CERAMIC TILES
NOTE: This Craftsman CMS, can
with operator care, cut most non-glazed
ceramic tiles. The normal blade will need
to be changed for a 8 1/4 in specialist
Diamond tile cutting blade.
Mark the cut to be made on the tile using
a suitable tile scribe, and cut along the
waste side of this line.
Take all necessary precautions to manage
any dust hazard created when cutting.
33