Craftsman 126.32565 Manual Del Operador página 36

WARNING l
To avoid injury from accidental starting, always turn switch OFF and unplug the
machine before attempting any maintenance or carrying out any adjustments
to your miter saw.
TROUBLESHOOTING GUIDE - MOTOR
MOTOR DOES NOT START.
BRUSH SPARK WHEN SWITCH IS
RELEASED.
1. FUSE
BLOWN OR CIRCUIT BREAKER
TRIPPED ON HOME PANEL.
2.
WORN MOTOR BRUSHES.
1.WORN BRUSHES.
2. OTHER.
1. VERIFY THERE IS ELECTRICAL
POWER AT THE POWER OUTLET.
REPLACE BRUSHES.
See MAINTENANCE section
1. REPLACE BRUSHES.
See MAINTENANCE section
2.
CONTACT SEARS SERVICE
CENTER.
36