Lelit Pro Mara Serie Manual De Uso página 42

PRO Line - Mara - PL62S · PL62 · PL62T
to start
Making an Espresso
Thanks to the default settings, the machine is immediately ready to make an Espresso.
42
Note.
organoleptic qualities, the flavour and aroma of an Espresso.
E
Preparing the machine for making coffee
E.1 Check the water level in the tank. If there is no water, follow the instructions
in item B.
E.2 Switch the machine on by pressing the on/off main switch (7).
E.3 Wait for a few minutes until the heating element LED (10) switches off.
E.4 Insert the filter holder (e) without any coffee in the distribution unit (13) and
fasten it firmly, at least up to align the handle with the padlock symbol indicated
on the group.
E.5 Wait until the heating element LED (10) switches off – about 20 minutes –
and the pressure gauge (5) shows about 1-1,2 bar.
E.6 Raise the coffee distribution lever (14) and allow the water to flow for a few
seconds.
E.7 Return the coffee distribution lever (14) back to its initial position.
The machine is ready to make coffee.
Note.
holder, which is essential for making excellent coffee.
Note.
that the heating element is keeping the water in the boiler at the ideal temperature.
F
Distributing the coffee
F.1 Insert the selected filter in the warm filter holder (e).
F.2 Fill the filter with the desired quantity of ground coffee.
Note.
F.3 Press the coffee with the tamper (a) and clean any coffee residues from the
edge of the filter holder.
The machine comes with a cup warmer (9). Using warm cups enhances the
This balances the temperature of the distribution unit with that of the filter
The continuous switching on and off of the heating element LED (10) shows
We suggest 7 g for one cup and 14 g for two cups.