Britax Poplar S Guia Del Usuario página 31

2. Recline the unoccupied
child restraint to
appropriate position
(see page 17).
3. Place child restraint
forward-facing on the
vehicle seat so that
the car seat base is
flat and parallel to the
vehicle seat.
NOTE: Ensure that no
more than 3" (7.5 cm)
of the base hangs over
the edge of the vehicle
seat (see page 12).
4. Open the ClickTight.
a. Lift the front cover
flap.
b. Squeeze the
ClickTight release
buttons.
5. Slide both the lap and
shoulder parts of the
vehicle belt into the
forward-facing belt
paths.
6. Buckle the vehicle belt.
NOTE: Ensure the
vehicle belt is not
twisted.
Remove slack from the
7.
lap part (a), then the
shoulder part (b) of the
vehicle belt.
8. Close the ClickTight
over the vehicle belt.
2
3
4
b
5
6
7
a
8
3"
a
b
29