Britax Poplar S Guia Del Usuario página 9

Motor Vehicles
This child restraint system conforms to all applicable
Federal motor vehicle safety standards(FMVSS 213).
Aircraft
For rear-facing aircraft installation:
Recline this child restraint
1.
(see page 17) and place
rear-facing on the aircraft
seat.
2. Slide the aircraft lap belt
into the rear-facing belt
paths over the cover with
the ClickTight in the closed
position.
3. Ensure the lap belt is not
twisted, buckle, and remove
all slack.
For forward-facing aircraft installation:
Place this child restraint
1.
forward-facing on the
aircraft seat in the upright
position.
2. Slide the aircraft lap belt
into the forward-facing belt
paths under the cover with
the ClickTight in the closed
position.
3. Ensure the lap belt is not
twisted, buckle, and remove
all slack.
• Install your child restraint in a window seat to avoid
blocking the aisle.
• If the aircraft lap belt is too short, ask a flight
attendant for a belt extender.
• Your child may experience discomfort if the buckle is
located in the seating area of the child restraint after
installation.
• Inflatable aircraft lap belts are not compatible with
this child restraint.
• This restraint may not fit all aircraft. Contact your
airline prior to travel to verify fit.
7