RS 125 Tuono_Ing_book_my03.book Page 20 Tuesday, April 29, 2003 3:11 PM
MAIN INDEPENDENT CONTROLS
6
4
1
CONTROLS ON THE LEFT PART
OF THE HANDLEBAR
The electrical parts work only when the ignition
switch is in position " ".
1) HORN PUSH BUTTON (
)
The horn is activated when the push button is pressed.
2) DIRECTION INDICATOR SWITCH (
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
20
use and maintenance RS 125 Tuono
3) DIMMER SWITCH (
If the dimmer switch is in position "
on, while if it is in position "
3) DIMMER SWITCH (
When it is in position "
light and the low beam are always on.
5
When it is in position "
4) LAP PUSH BUTTON (chronometer)
This button makes it possible to use the multifunction comput-
3
er chronometer.
For the setting of the functions, see page 17 (MULTI-
FUNCTION COMPUTER).
2
5) COLD START LEVER ( )
The starter for the cold start of the engine is operated by rotat-
ing the lever " " downwards.
To disconnect the starter, move the lever " " to its initial po-
sition.
6) HIGH BEAM SIGNALLING PUSH BUTTON (
It makes it possible to use the high beam for signalling to
forthcoming vehicles while overtaking and in case of peril
and/or emergency.
)
-
)
", the high beam comes
", the low beam comes on.
-
)
" the parking lights, the dashboard
", the high beam comes on.
)