Bulbs; Changing The Headlight Bulbs - APRILIA RS 125 Tuono 2003 Manual Del Usuario

RS 125 Tuono_Ing_book_my03.book Page 73 Tuesday, April 29, 2003 3:11 PM

BULBS

C a r e f u l l y r e a d p a g e 4 3 ( M A I N T E -
NANCE).
Before changing a bulb, turn the
ignition switch to position " ".
Change the bulb wearing clean
gloves or using a clean and dry cloth.
Do not leave fingerprints on the bulb,
since these may cause its overheating
and consequent breakage.
If you touch the bulb with bare hands,
remove any fingerprint with alcohol, in
order to prevent it from blowing.
DO NOT FORCE THE ELECTRIC
CABLES.
3 1
2
CHANGING
THE HEADLIGHT BULBS
Carefully read page 73 (BULBS).
Position the vehicle on the stand.
N
Before changing a bulb, check
the fuses, see page 69 (CHANG-
ING THE FUSES).
The headlight contains:
Ease off the front fairing, see page 56 (RE-
MOVING THE RIDER SADDLE).
One high beam bulb (1) (right side).
N
N One parking light bulb (2) (lower side).
One low beam bulb (3) (left side).
N
To change the bulbs, proceed as fol-
lows:
PARKING LIGHT BULB
To extract the bulb socket, do
not pull the electric wires.
N Working on the rear side of the front part
of the fairing, seize the bulb socket (4),
pull it and remove it from its seat.
N Withdraw the parking light bulb (5) and
replace it with one of the same type.
use and maintenance RS 125 Tuono
73